Solid floor and floating systems
LK Slotted Board EPS 16
On insulated load-bearing floors with LK Slotted Board EPS 16
LK Slotted Board EPS 16 is the solution for anyone who is renovating a room with restricted height. The insulated, pre-grooved panel is only 16 mm thick and is installed over existing floors.
The heating pipe loops are simply pushed into the panel grooves, which is entirely covered by a bonded aluminium plate; heat from the pipes is spread evenly across the entire floor surface, with little downward heat loss.
Load bearing flooring is then installed directly on top of the panel. If, for example, you decide to lay tiles over the floor heating installation, the total installation height is only 26 mm.
Product range >
- Ideal for renovation
- Cuts downward heat loss
- Suitable under all types of final flooring
- Low installation height: from 25 mm
LK CombiBoard EPS 14/18/30/50/70
For floating floors with LK CombiBoard EPS 14/18/30/50/70
LK Floor Heating in design with LK CombiBoard EPS for laying on load-bearing floor constructions. The system consists of insulation boards of EPS class S300 equipped with a laminated heat distribution layer for optimal heat distribution.
LK CombiBoard EPS has high insulating properties as well as being excellent for short- or long-term loads.
The EPS boards are equipped with pipe channels and integrated turning channels.
Product range >
- For renovation and new-build
- No loose plates
- One board instead of two (integrated turns)
- Suitable under all types of final flooring
LK Foil Board Silent
On insulated load-bearing floors with LK Foil Board Silent
The LK Foil Board Silent is designed for floating installations on load-bearing floor structures in dry environments.
This system is constructed with EPS insulation boards, either 30 mm or 50 mm thick, featuring sound-dampening properties for intermediate floors.
For a specific floor height, the 50 mm board offers economic savings by requiring significantly less leveling compound.
Product range >
- Ideal for renovations
- Perfect for multi-family buildings
- Quick and secure installation
- Grid pattern for easy placement
- Provides thermal and sound insulation between floors
LK Clip Rail 12
On insulated load-bearing floors with LK Clip Rail 12
LK Clip Rail 12 is designed for LK’s 12 mm pipes and is often used for the renovation of small areas, such as bathrooms, entrance halls and laundry rooms.
The clip rail has double-sided tape so that it can be easily fixed direct to the sub flooring. Once the pipes are positioned in the clip-rail, they are encapsulated in self-levelling screed or filler. Then, all that is left is installation of the final flooring.
Product range >
- For renovation
- Suitable under all types of surface flooring
- Ideal for small areas, such as bathrooms, entrance halls and laundry rooms
- Low installation height: from 25 mm
